Print Page   |   Contact Us   |   Sign In   |   Join NOMMA!
Community Search
Architects - Joint Pipe
Share |

Guideline 1: Joint Finishes

These voluntary guidelines were developed by the NOMMA Technical Committee, with strong input from the membership.

All samples shown are primed steel.

Home    Back To Joint Finishes    Back To Architect's Resources

Square Tube
Square Solid
Pipe Raked


Example C: 1-1/2" to 1-1/2" pipe "T"


Finish #1 - No evidence of a welded joint.


Finish #2 - Completely sanded joint, some undercutting and pinholes okay.

Finish #3 - Partially dressed weld with spatter removed.
Finish #4 - Good quality, uniform undressed weld with minimal spatter.

These guidelines are voluntary recommendations for information purposes only. It is the responsibility of the individual to ensure proper construction design. The use of fillers is not included in the scope of this work. These guidelines do not endorse or discourage fillers. They deal with finished appearance only.

© 1994 by the National Ornamental & Miscellaneous Metals Association. All rights reserved.

more Calendar

10/6/2017 » 10/7/2017
NEF Octoberfest 2017

NEF Pre - METALfab2018 Continuing Education

2/6/2018 » 2/7/2018
METALfab2018 NEF Education Program

Featured Members
Karine Maynard, Maynard Studios Inc.Recipient of Houzz Design AND Service Awards, 2015
Mark R. O'Malley, O'Malley Welding & Fabricating Inc.O'Malley Welding & Fab featured in April 2016 issue of FFJournal

Membership Management Software Powered by YourMembership  ::  Legal