Print Page   |   Contact Us   |   Report Abuse   |   Sign In   |   Join NOMMA!
Community Search
Architects - Joint Solid
Share |

Guideline 1: Joint Finishes

These voluntary guidelines were developed by the NOMMA Technical Committee, with strong input from the membership.

All samples shown are primed steel.

Home    Back To Joint Finishes    Back To Architect's Resources

Square Tube
Square Solid
  Pipe
Pipe Raked

 

Example B: 1/2" square to 1/2" x 1" bar "T"

 


Finish #1 - No evidence of a welded joint.

.

 
Finish #2 - Completely sanded joint, some undercutting and pinholes okay.

Finish #3 - Partially dressed weld with spatter removed.
 
Finish #4 - Good quality, uniform undressed weld with minimal spatter.

These guidelines are voluntary recommendations for information purposes only. It is the responsibility of the individual to ensure proper construction design. The use of fillers is not included in the scope of this work. These guidelines do not endorse or discourage fillers. They deal with finished appearance only.

© 1994 by the National Ornamental & Miscellaneous Metals Association. All rights reserved.

more Calendar

10/14/2016 » 10/15/2016
NEF Octoberfest Continuing Ed & Vendor Showcase

4/21/2017
NOMMA Workshop

Featured Members
Allyn Moseley, The Heirloom CompaniesAllyn Moseley and The Heirloom Companies are featured in local newspaper, The Greenville News
William Zahner, A. Zahner Co.Congratulations to A. Zahner for their 2015 Copper in Arch. Award.

Membership Management Software Powered by YourMembership.com®  ::  Legal